RV Inspections are like home inspections, evaluating their systems, structure, and safety. They can be performed on all classes of RV. Detailed reports, including 80 to 100 photos (depending on package selected), are delivered in PDF format within 24 hours of scheduled inspections, enabling potential owners to make educated decisions on their purchase. 

 You will be getting your RV inspected by an experienced, unbiased and impartial inspection service that, by our code of ethics, does not have any financial interest in the transaction. The inspections we perform provides detailed information about the current operating condition of the RV you have requested the inspection on. If everything is working and in good operating condition, the report will provide confirmation that what the seller said and what you thought to be true is true. However, in the case where components are not working, degraded or damaged, the report lets you, the purchaser, know the true condition of the RV before the purchase is consummated. 

 Get your RV Inspected from a NRVIA  certified RV Inspector. The RV industry does not require licensing to operate an inspection business. We carry commercial Liability Insurance to protect all parties involved in an RV inspection. I am also a registered RV technician thru the RVIA. 

 The amount of time an inspection can take is dependent on the type of unit and depth of inspection you purchased.   Obviously, more in-depth inspections and fluid sampling are going to take several hours (possibly 6-10 hours)  Basic inspections will take less time. 

In order to give you the most thorough inspection, it is better to have the unit hooked up in a campground or on a level place where full hookups are available. The area around the unit needs to be clear of any obstructions that would prevent me from accessing anything on the roof, sides, end caps or underneath the RV. I cannot examine or test anything I cannot access.

• Sign the pre-inspection contract and pay for the inspection.
• The RV needs to be hooked up to power, water and sewer with the gray and black water holding tanks empty. The refrigerator should be turned on at least 12 hours prior to the inspection to allow it to get cold.
• All of the aisles, appliances, furniture, doors and RV related systems should be clear and easily accessible. Ideally all owner possessions should be removed. I need to be able to look in, under and around everything.
• The on board water tank should be at least 1/3 full of water.
• All RV keys, remote controls and manuals should be made available.
• The propane tanks need to have propane in them so that I can test the system.
• The batteries need to be charged.
• If a generator is installed, it needs to have fuel in it so that it can be tested.
• Ideally the slides need to be extended or there needs to be room to extend the slides as they will be tested.
• The client needs to present at the beginning and end of the inspection process. I will give you a call towards the end of the inspection to give you time to come back.

We do not provide power cords, water or sewer hoses, electrical adapters, connectors, generator fuel or oil, propane or batteries. Please make sure that any or all of these items are available prior to the inspection.

Due to insurance regulations, We will not drive any motorhome or motor vehicle.

​

 Most clients should expect to have the report emailed to them within 24 hours following the onsite inspection. Fluid samples will be sent the next day to the lab, the lab reports are usually received in 5 to 7 days from the inspection. Reports will be reviewed by the inspector and sent via email to you. 

 We encourage you to make sure that the unit has all utilities connected for a minimum of 12 hours so all systems can be inspected. If you have any owner manuals or appliance manuals, please have those available to the inspector at the beginning of the inspection. Ask your inspector for other items that you can do to help prepare for the inspection. 

 Internal parts depend on oils and coolants to remain stable between service intervals. Oil and coolant analysis tells you when your oils and coolants experience any signs of early breakdown or contamination. Not only does fluid sampling check them for signs of thermal breakdown, mechanical breakdown or contamination; but, the lab can also check for any indication of internal part wear. Oil and coolant analysis allow you to detect anything that might need your attention long before they can result in road calls, expensive repairs or lost travel time. 

 Yes. If you decide to continue using our service. Second and third reports will be offered at a 10% discount. 

An invoice will be sent to you by e-mail using INtuit Quickbooks and you will be able to pay the invoice via Paypal, Venmo, or using your credit card.